Monthly Archives: December 2018

PCF PAS NSX-T 2.3 NCP Tile (NO-NAT)

Populating the NSGroups via OpsManager The NSGroups we created which will be used as server pool for the NSX-T LB are empty, we need to use OpsManager to populate the entries into the NSGroups. The following steps are carried out after you have successfully configured the PAS Tile. The Installation Dashboard of Ops Manager should… Read More »

PCF PAS NSX-T 2.3 Preparation (NO-NAT)

T1 Routers & Logical Switches Create T1 Router – T1-PAS-Infrastructure. Edge cluster is not needed for this T1 router. Create Logical Switch LS-PAS-Infrastructure. Create Router port on the T1 and connect to the LS. IP Address: 10.11.24.1/24 On the T1, enable route advertisement options.   Create T1 Router – T1-PAS-Infrastructure. Attach an Edge cluster to… Read More »

Upgrading NSX-T to 2.3

Long overdue. Has always wanted to upgrade my non-nested NSX-T environment which was still running on 2.1 but putting on hold because I wanted to blog about and record the upgrading process. The big motivation for the upgrade was due to the Pivotal Application Service(PAS) as there were some significant improvements for Load Balancer with… Read More »