Category Archives: PCF

PCF PAS NSX-T 2.3 NCP Tile (NO-NAT)

Populating the NSGroups via OpsManager The NSGroups we created which will be used as server pool for the NSX-T LB are empty, we need to use OpsManager to populate the entries into the NSGroups. The following steps are carried out after you have successfully configured the PAS Tile. The Installation Dashboard of Ops Manager should… Read More »

PCF PAS NSX-T 2.3 Preparation (NO-NAT)

T1 Routers & Logical Switches Create T1 Router – T1-PAS-Infrastructure. Edge cluster is not needed for this T1 router. Create Logical Switch LS-PAS-Infrastructure. Create Router port on the T1 and connect to the LS. IP Address: 10.11.24.1/24 On the T1, enable route advertisement options.   Create T1 Router – T1-PAS-Infrastructure. Attach an Edge cluster to… Read More »

PCF PAS Ops Manager with NSX-T Installation

Please setup the NSX-T Networks before deploying PAS Ops Manager. You can refer to this blog post to prepare the NSX-T. http://blog.acepod.com/?p=953 After you deploy the VM using the ova – pcf-vsphere-2.3-build.170.ova. 1. vCenter Config 2. Director Config 3. Create Availability Zones 4. Create Networks. At vCenter, you should be able to see the NSX-T… Read More »

PCF PAS Ops Manager NSX-T Error connecting to NSX IP

1. Error connecting to NSX IP: The NSX server’s certificate is not signed with the provided NSX CA cert. 2.You will need a linux machine to create an AD cert and sign it. Create the following folders. mkdir cnf mkdir certs mkdir private touch cnf/ca.cnf nano cnf/ca.cnf [root@pks-kube02 ~]# cat cnf/ca.cnf [ ca ] default_ca… Read More »